Home / Products / Data Security & Destruction / Atola Disk Recycler

Atola Disk Recycler

Data Security & Destruction

Atola Disk Recycler

Scriptable high-speed SAS, SATA and IDE hard drive tester, wiper and repairer.

470 MB/s per port4 independent portsUp to 800 drives
Model
DEY-DR
Category
Data Security & Destruction

3D model
by DataExpert

DEY-DR

The interactive 3D model needs a modern browser with WebGL. Every detail it shows is listed in the specification below.

Drag to rotate Scroll to zoom Hover a marker for detail Model built to reference imagery — not a manufacturer CAD file

Detail

Atola Disk Recycler

DEY-DR

Wiping is only half of decommissioning. The Recycler tests and repairs as well, so drives with life left in them go back into service instead of into a skip — and the ones that do not are erased to a standard you can put in a report.

Each of the four ports works on its own drive, on its own task, at the same time. Chain the units and one software interface drives the lot.

Functions

Custom scripts, editor included Reports & logs, printing supported DoD and NIST wiping methods Security Erase Linear pattern erase S.M.A.R.T. testing Seek test Transfer rate test Surface scan Vendor-specific ATA commands Custom SCSI commands for SAS Checksum MD5 / SHA1 / SHA224 / SHA256 / SHA384 / SHA512 HPA / DCO control ATA password set and remove Bad disk repair by sector remapping Report search with CSV Stand-alone mode

Why it is quick

  • 470 MB/s — 28 GB/min — on every port, not shared across them
  • Four ports take SAS and SATA drives; IDE through an adapter
  • Each disk works independently, with a different task assigned per port
  • Connect up to 200 units and work 800 drives from one interface
  • Units mount into a standard server rack
  • Two-click firmware update across every unit
  • Reporting needs no external database

Wiping to a standard you can cite

  • DoD 5220.22-M
  • NIST 800-88
  • Security Erase
  • Fill with pattern
  • Checksum verification on completion

It does not need a computer to work. A USB drive holding a script is enough to run the unit in stand-alone mode, which matters when the job happens somewhere a laptop should not go.

Specification

Model numberDEY-DR
Supported interfacesSAS, SATA I/II/III, IDE with adapter
Ports4, each taking SAS or SATA drives
EthernetRJ45 / 1 GbE
ControlWindows application, or stand-alone
Maximum transfer470 MB/s (28 GB/min) per port
Power90 W average, 150 W peak
Dimensions425 (W) × 500 (D) × 84 (H) mm
WeightApproximately 8 kg

Source: Manufacturer brochure, 2 pages

Also in Data Security & Destruction

Specify the right unit.

Tell us the media you meet, the volumes you handle and where the work happens, and we will tell you which of these you actually need — and which you do not.